Whether you need it for your next DIY project or you need to smooth down old cabinets in preparation for a new coat of paint, a random orbital sander can make the otherwise tedious sanding job easier, smoother, and more efficient and effective.
It will save you more time than your trusted sandpaper. A random orbital sander allows you to complete your sanding projects easily and helps you produce a smooth surface finish for woodworking or metalworking projects.
We created a guide outlining the best features to consider when buying the best random orbital sander and also listed our top favorites in the market.
The Best Random Orbital Sanders
1. Bosch ROS20VSC Palm Sander
- SMOOTH FINISH: pad dampening system designed to eliminate swirl...
- EASY DISC ATTACHMENT: through Bosch's signature Hook and Loop...
- VARIABLE SPEED CONTROL: powerful 2.5 AMP motor allows speed to...
- DUST COLLECTION: features a micro filter system for fine dust and...
- KIT CONTENTS: Includes sanding pad, sanding disc, dampening ring,...
The Bosch ROS20VSC Palm Sander is designed to allow you to finish your tasks quickly without any swirl marks. The sander features an integral pad dampening system that helps prevent swirl marks. The random orbital sander is equipped with Bosch's signature HookTight hook-and-loop disc attachment that holds the discs firmly in place while you work whilst still allowing you to easily swap discs when necessary.
The Bosch 5 inch orbital sander has a variable speed control; thus, users can adjust the speed based on the task. The speed is adjustable from between 7,500 and 12,000 opm, with a single speed of 12,000 opm so that operators can dial up or down.
The Bosch Sander 5 inch random orbital sander has a 2.5 amp motor ideal for plenty of DIY tasks. It comes with a built-in micro filter system that traps dust particles as small as 1/2 micron in diameter and has a twist-off dust canister that lets you see at a glance when it’s full. It also has a vacuum-hose adapter if you prefer to hook the device to your wet/dry shop vacuum.
The Bosch 5 inch orbital sander features an ergonomically shaped handle with a soft-grip top. It is long enough to allow you to grasp the sander in various positions, greatly reducing strain on your hand and wrist. Additionally, the sander weighs only 3.5 pounds and has an 8-foot cord; hence you can stand comfortably while working.
The kit includes a sanding pad, sanding disc, dampening ring, dust canister, vacuum adapter, and carrying case.
Pros:
Cons:
2. Makita XOB01Z Random Orbit Sander
- Three speed settings (7,000/9,500/11,000 OPM) engineered for...
- Large 1/8" random orbit action engineered for fast sanding and...
- One-touch electronic speed control switch provides fast, medium...
- One-touch electronic speed control switch provides fast, medium...
- Makita XOB01Z 18V LXT Lithium-Ion Cordless 5" Random Orbit...
The Makita XOB01Z runs on a rechargeable 18-volt lithium-ion battery. (The battery is sold separately) This is great as you don't have to worry about getting out that extension cord. In terms of runtime, you get 20 minutes of power on high-speed and 40 minutes on low, which is sufficient for all but the most intense sanding tasks.
The Makita random orbital sander features three-speed settings that are designed to increase efficiency and mobility. The settings are 7,000/9,500/11,000 OPM, and the three-speed motor easily spins the 5-inch disc at various speeds per minute. You can manage this through the one-touch electronic speed control.
The Makita sander features a dust-sealed switch and an attached dust collection bag. The Makita sander body is ergonomically designed hence increasing user comfort.
Pros:
Cons:
3. Black & Decker BDCRO20C
- FAST MATERIAL REMOVAL – At 12,000 opm (oscillations per...
- COMPACT, EASY-TO-MANEUVER DESIGN – Compact and helps reduce...
- HOOK-AND-LOOP SYSTEM – For convenient sandpaper changing.
- ON-BOARD DUST COLLECTION – Easy-empty dust bag keeps your work...
- 20V MAX* LITHIUM ION BATTERY – Holds a charge for up to 18...
This Black + Decker random orbital sander is ideal if you're looking for a power tool for weekend fix-ups and DIYs. The 20v max random orbital sander is cordless and features and a hook and loop system that helps make paper changes easy.
It comes with a dust bag and has a speed setting of 12,000 opm. It can be used to remove paint and stain or varnish from wood, metal, or plastic; shape wood or surface preparation for finishing projects.
Pros:
Cons:
4. MAXXT Electric 5mm Random Orbital Sander
MAXXT Electric 5mm Random Orbital Sander is rated as one of the best for the professional or the DIY enthusiast who wants precision and reliability. Equipped with powerful motor and a 5mm orbit, it attains maximum sanding on different surfaces such as woods and metals. Powered by a serious amount of wattage, this sander is easy to operate, making it suitable for complicated and elaborate work as well as broad-spectrum sanding.
The features of this MAXXT sander include a 350W motor for consistent power which ensures that sanding is done smoothly and evenly. Comfortable to use for long hours due to its design and control, it has dust collection to maintain cleanliness on the working area. Steady speed range (6,000–12,000 RPM) enables precise regulation depending on the material and the required surface smoothness. The model is portable which increases its versatility and the availability of several sanding discs makes it even more efficient.
Pros:
Cons:
5. DCK Random Orbital Sander
The DCK Random Orbital Sander is one of the best sanding tools available to do it yourself and professional users. It has a 3.0 AMP motor that helps provide a dependable output which makes it suitable for flattening any wooden surface, stripping paint or sheen, or in preparing for finishing. Six speed settings ranging from 6000 to 12000 OPM was perceived as flexible for use on various materials and tasks. The innovative shape of the palm makes it comfortable to hold, especially during intense operations, and the system of dust extraction makes the environment cleaner.
The sander’s power is boosted by a 3.0 AMP motor for a constant performance when working on tough jobs. It has six setting that provide flexibility and this makes it easy to adjust the level of sanding required. The 5-inch pad is wide with good precision for large surface areas, and the hook-and-loop system makes it easy to switch pads.
Pros:
Cons:
Factors To Consider When Buying The Best Random Orbital Sanders
a) Corded or Cordless
A corded random orbital sander is ideal if you're working indoors and have access to an electrical outlet.
While a portable cordless orbital sander is better suited if you'll be mostly working outside or your worksite does not have access to an electrical outlet. Rechargeable lithium-ion batteries power these types of random orbital sanders. Though cordless orbital sanders have the advantage of being portable, you have to ensure not to use the tool for several hours as their run time is limited.
b) Power
A random orbital sander's power rating is usually provided by motor amp rating. Most random orbital sanders have motor amp ratings that range from 2.5 to 3.3 Amp motors. This is the power of the motor running inside the random orbital sander. Some sanders with lower spinning speeds (OPM) can actually be more powerful than sanders with a higher spinning speed if they have a more powerful motor.
c) Dust Collection
The dust collection system is one key factor to consider when looking for the top random orbital sanders. Some of the key things to look into are:
- The size of dust collection unit – there are key differences in the size of the unit across different types of random orbital sanders
- The ease of removing it and emptying it - A lot of sanders come with a one-hand twist removal feature
- Its effectiveness at collecting the dust
d) Build Quality
This a factor most people overlook while purchasing. However, it is essential to look for a random orbital sander that is sturdy and has a good build quality to use for a longer time. For instance, power tools built with metal are more likely to last longer than those built from plastic.
In terms of reliability, check if the machine has a warranty duration. Most of the tools come with a 1 -2 year warranty, while others include a 3 year or more warranty.
e) Type of Handle
Most random orbital sanders have a palm grip design, thus allowing you to grasp the top handle located directly on top of the pad to control the tool's direction fully. The design is ergonomic and reduces hand fatigue.
However, the downside is that some products have larger palm grips than others, making it difficult to grasp for those with smaller hands. Palm grip design sanders are ideal for smaller projects due to their compact and lightweight bodies. You can also grip the sander around the neck for greater control.
If you're looking for greater control and a more secure grip, random orbital sanders with D handles would be better suited. Some models have a trigger switch located right below the handle, allowing for a more convenient operation.
For those looking to reduce arm and hand fatigue, there's the option of auxiliary handles. A random orbital sander with an auxiliary handle is more convenient as it allows you to apply the right amount of pressure to the tool while working. It's also easier to use the tool vertically or overhead. There are some models that have built-in auxiliary handles, while others have auxiliary handles that can be adjusted and removed when necessary.
f) Sander Disk Size
The standard disc side for random orbital sanders is 5 inches in diameter. These are more commonly available in the market. It is possible to find sanders with a diameter of 1 – 4 inches smaller discs, which are ideal for sanding in tight spots.
On the other hand, 6-inch or larger discs are better suited for larger projects like sanding a hardwood floor. Hence, when selecting the base plate/disc size, it should be based on the sander's size and model you’re going to purchase.
When selecting the size of the disc, the larger sander disc is considered more preferable as it offers better performance to the use, especially at higher contact surface area. It would be best if you also considered sanders that are easy to replace and are handy while working with different sanding discs with different grit levels.
g) Variable Speed
Most random orbital sanders come with a single-speed, but a few models have a variable speed that tones sanders' aggressiveness. The variable speed control knob on the handle allows you to change the speed and aggression of sanding. It provides control over the speed of the tool, thus aiding in a smooth finish.
A higher speed helps you to grind down the roughness quickly and is ideal for general sanding or when dealing with coarse materials. The lower speed provides a smooth finish to the material while using the sander. It is better suited for fine sanding.
Lacking a variable speed control is not an issue. You can do without it as you can achieve success by simply using the correct sandpaper grit, which is coarse with roughness, medium for smoothing, and fine for finish work.
Frequently Asked Question About Random Orbital Sanders (FAQ)
What is the difference between orbital sanders and random orbital sanders?
The orbital sander generally the older and simpler of the two. It has a square foot that accepts a quarter of a 9×11 sheet of sandpaper. These tools are often called quarter-sheet sanders. Its best feature is its square shape which allows it to get in corners and up against edges. Orbital sanders aren’t overly aggressive; hence it's hard to remove a lot of material. It moves in a circular motion.
A random orbital sander does not create a distinct pattern and instead moves back and forth. It allows the tool to be used without any concern for grain direction. It removes more material than the orbital sander. Many random-orbit sanders feature variable-speed switches for less aggressive sanding. They also have hook-and-loop sandpaper disks, which easier to change than the quarter-sheets clamped on orbital sanders.
